Mortar Rake Bits & Raking Pins

6 products

Mortar rake drill bits (router pins) for M14 angle grinders: diamond for hard cement mortar, carbide for soft lime. Where a raking blade cuts a straight bed joint, a rake bit goes where the blade cannot: perp ends, vertical joints, corners and the detail around openings. Most repointing jobs need both.

Every rake bit here threads straight onto a 115mm or 125mm angle grinder (M14). The 8 x 100mm long-reach pins also work as a brick removal tool when you need to take out a single brick.

Buying guide & FAQs
  • Same day despatch on orders by 12pm
  • 30 day returns
  • Buy now, pay later with Klarna
Sidebar

Categories

Featured Products

angle grinder dust shroudClose-up of a dust extraction on a white background Angle Grinder Dust Extraction Guard for Cutting & Mortar Raking - 115mm & 125mm

    Angle Grinder Dust Extraction Guard for Cutting & Mortar Raking - 115mm & 125mm

    Grinder Dust Extraction Attachment for Mortar Masonry Brick Raking High-performance attachment for angle grinders. Whether you're repointing, raking mortar, or wall chasing, this guard transforms dusty, messy jobs into cleaner, more controlled tasks. Its precise engineering and strong design make it a key accessory...
    £27.45
    £27.45
    £27.45

    Choosing the Right Raking Pin

    Filter
    • 10
    • 15
    • 20
    • 25
    • 30
    • 50
    • Featured
    • Most relevant
    • Best selling
    • Alphabetically, A-Z
    • Alphabetically, Z-A
    • Price, low to high
    • Price, high to low
    • Date, old to new
    • Date, new to old
    Sort

    Sort by:

    • Featured
    • Most relevant
    • Best selling
    • Alphabetically, A-Z
    • Alphabetically, Z-A
    • Price, low to high
    • Price, high to low
    • Date, old to new
    • Date, new to old

    Buying guide

    More about this range

    Where a raking blade cuts a straight bed joint fast, a rake bit goes where the blade cannot - perp ends, vertical joints, corners and detail around openings. Most repointing jobs need both.

    Why a rake bit rather than a blade

    • Routes both directions - horizontal bed joints and vertical perps with the same tool.
    • M14 fitting - threads straight onto the spindle of any standard angle grinder.
    • Controlled depth - easier to hold a consistent rake depth in irregular or historic brickwork.
    • Diamond tipped - far longer life than tungsten in hard cement mortar.

    What we stock

    The diamond mortar rake pin is the standard M14 rake for grinder work. For lime and softer historic mortar, the DR850 joint rake and the TR350 repointing tool cut with less risk to the brick face. The starter kit and repointing kit pair a rake with a depth-adjustable dust guard.

    Extraction is not optional

    Routing mortar throws a concentrated plume of respirable crystalline silica straight back at the operator. Fit a dust extraction guard to an M-class vacuum - it is a legal duty on site, and it keeps the joint line visible while you work.

    Raking long horizontal runs instead? A mortar raking blade is faster. See all mortar rake tools, or read how to repoint brickwork.

    Recently Viewed Products