More about this range
Every diamond cutting blade we stock, in one place - for angle grinders, table and bridge saws, floor saws and chop saws. If you know what you are cutting, start here.
Choose by material
Choose by machine
For a 115 mm or 125 mm angle grinder, our segmented diamond blades run good, better, best across four price points. For bench work, see table and bridge saw discs. For wood, metal and composites, our circular saw blades.
Diamond blade sizes, bores and machines
Every blade lists its diameter, bore and maximum speed on the product page. This table shows which size goes with which machine and the bores you will find at each diameter.
| Diameter |
Typical machine |
Bore options |
Examples |
| 115mm |
4 1/2 inch angle grinder |
22.23mm, or M14 spin-on |
SX-10 PRO, Mi350, BF750, CK850T, FZ550, MR350
|
| 125mm |
5 inch angle grinder |
22.23mm, or M14 spin-on |
SX-10 Superior, Mi750, BF850, CK850 AkkuMAX, FZ850, CGF750
|
| 150-180mm |
180mm angle grinders and wall chasers |
22.23mm, 25.4mm or 30mm |
WS350, WS750, WS850, CK650T, CK850T, Mi850
|
| 230mm |
9 inch angle grinder, petrol cut-off saw, disc cutter |
22.23mm (22.23/25.4mm on CK tile blades) |
SX-16 MegaMax, Mi650, BF850, FZ850X, RC850, VC750
|
| 300mm |
Petrol cut-off saw, disc cutter, table saw |
20mm, 22.23mm, 25.4mm or 30mm |
SX-12 MAX, Mi350, BF750, FZ850N, MA750, HM750
|
| 350mm |
Table and bridge saw, floor saw, petrol cut-off saw |
20mm, 22.23mm, 25.4mm or 30mm |
Mi750, BF850T, FZ550, FZ850X, CB750, HM750
|
| 400-500mm |
Floor saw, table and bridge saw |
20mm, 25.4mm or 30mm |
CB750, HM750, MA750, Mi850, CK850T
|
Getting the size right
115 mm and 125 mm blades share the same 22.23 mm bore, which is why so many people order the wrong one - they are not interchangeable. Read 115 mm vs 125 mm angle grinder discs before you buy.
Cutting indoors or in an occupied property? Fit a dust extraction guard - on-tool extraction is a legal duty on site, not best practice. A glazed blade that has stopped cutting can often be brought back with a resharpening stone rather than replaced.
Frequently asked questions
What size diamond blade fits my angle grinder?
A 115mm (4 1/2 inch) grinder takes a 115mm blade and a 125mm (5 inch) grinder takes a 125mm blade. Both use a 22.23mm bore, which is why the two get mixed up, but they are not interchangeable. 230mm (9 inch) grinders take 230mm blades, again on a 22.23mm bore. Check that the maximum speed marked on the blade is at least the no-load speed of your grinder.
Segmented, turbo or continuous rim: which diamond blade do I need?
Segmented blades (SX-10, SX-12, SX-16 and the Marcrist Mi250 to Mi850) cut fastest in brick, block and concrete and clear dust well. Continuous-rim blades (CK350S, CK750S) give the cleanest, chip-free edge in ceramic, mosaic and natural stone tile. Turbo rims (BF750, BF850, CK850T) sit between the two: faster than a continuous rim and cleaner than a segmented blade.
Can I cut porcelain tiles with an angle grinder?
Yes, with a diamond tile blade rather than a masonry blade: the CK850T or CK850 AkkuMAX for wall and floor tiles, the FZ550 for 20mm outdoor porcelain and the FZ850 or FZ850C for slabs up to 30mm. Mark the cut, score a shallow first pass, support the tile fully and let the blade cut in steady passes rather than forcing it.
Will a diamond blade cut metal?
A standard masonry diamond blade is not made for metal. The vacuum-brazed MC850 Cuts-It-All cuts steel, cast iron, copper, plastics and wood with nails as well as concrete and stone, and the SX-16 MegaMax handles reinforcing steel up to 22mm inside concrete. For sheet steel and inox, use a disc from the metal cutting discs collection.
Can diamond blades be used dry?
Most of the angle grinder blades here are rated for dry or wet cutting, including the BF750, Mi350, CK850T, FZ550 and FZ850. Table saw, bridge saw and floor saw blades such as the MA750, HM750, FZ850N and BF850T are for wet cutting only. Water extends blade life and suppresses dust; when you cut dry, fit an extraction guard.
Why has my diamond blade stopped cutting?
The segments have usually glazed: the metal bond has polished over and no fresh diamond is exposed. Make a few cuts into an abrasive material, or run the blade into a diamond blade resharpening stone for three or four pulls, and it will cut again. If the segments are worn down to the steel core, replace the blade.